China European Commercial Vehicles Truck Clutch Release Bearing 3100 026 432 for HOWO, Shacman, Dongfeng, Foton, FAW, Iveco, Scania, Renault, Volvo, Mercedes-Benz, Hi supplier

Solution Description

1,Company Introduction
Derain Auto Areas Co., Ltd is a Automobile clutch business specializing in R&D, generation and sales of light-weight, medium and heavy vans in China. Our items are suitable for European, Japanese, Russian, The united states and Chinese Vehicles.

2, Product Edge:
two.1 Material
Our Material from very best steel manufacturing facility “ZheJiang Bao Steel’s” in first business, we manufacture 90% spare components by ourselves, handed the examination of nationwide authorities. And all our spare components is after heating process.
2.2 OEM Provider
We had cooperated a lot of OEM factory in china, This sort of as SCHAEFFLER Luk clutch manufacturing unit,  DAFAN spring diaphragm manufacturing facility, XIHU (WEST LAKE) DIS. spring manufacturing facility. And so on

2.3,High Technology(laser welding)  (Same AS SACHS Company)

IPJ & KUKA 4KW big electricity and very first course laser welding equipment, same as SACHS Firm in Germany. we are only 1 manufacturing facility in china has this equipment and technologies.

Most manufacturing unit use conventional rivet related , it is easy broken than laser welding, short doing work lifestyle , non-resistance to flexure ,block and impact.

two.4 Strictly good quality control Manager technique
We have a total established of full testing gear, We examine every 1 clutch cover’s details after concluded production.

And we will location take a look at the content prior to set in the storage.
three,Solution data:



RENAULT : 571730004

RENAULT : 745712222

RENAULT Vehicles : 745712222

SCANIA : 1655843

SCANIA : 1668921

SCANIA : 1672944

VOLVO : 1655843

VOLVO : 1668921

VOLVO : 1668922

VOLVO : 1669832

VOLVO : 16698334

VOLVO : 1672944

VOLVO : 20569157

VOLVO : 3192222

VOLVO : 8112113A

Reference NO.:


DT Spare Components : 2.35714

LuK : 


SAMPA : 032.257

ST-TEMPLIN : 08.290.7000.571

STELLOX : 83-57158A-SX

Q1. What is your conditions of packing?
A: Usually, we pack you merchandise use brown or white blank neutral bins. If you have legally registered patent, we can pack the items in your branded containers after receiving your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% ahead of delivery. We’ll present you the photos of the goods and offers ahead of you shell out the balance.

Q3: Can i get any discount? 
A: Sure, there are 3 ways: 
one: Order more than one thousand units 
two: Place purchase with our trailer and other goods 
three: a hundred% TT innovative payment. 

This autumn: Is inspection need to have following closing production? 
A: No, CHALLENWAY has a professional interior QC group to management the quality inside and soon after final generation. The buyer’s inspection is also allowed. 

Q5: How lengthy I can get the items after affirm get? 
A: We want 7-30days for manufacturing If you could set up one hundred%TT, we will scheduling ship superior, you dont need to wasting time for waiting around shipping. 

Q6. Can you generate according to the samples?
A: Indeed, we can produce by your samples or complex drawings. We can develop the molds and fixtures.

Q7: What is your ensure? 
A: 1 year or 12000km 

Q8: What must i do if claims seems? 
A: When the claims appear, what we need to have are the pictures of goods, use condition brief, the order data. CHALLENWAY will analysize the issue, even discipline investigation, and work out an last selection with buyers. 

Q9: How do you make our enterprise long-time period and good relationship?
A:1. We keep good top quality and competitive price tag to guarantee our consumers benefit


US $10-25
/ Piece
10 Pieces

(Min. Order)


Shipping Cost:

Estimated freight per unit.

To be negotiated|

Freight Cost Calculator


After-sales Service: 1 Year
Warranty: 1 Year
Part: Clutch Bearing


US $10-25
/ Piece
10 Pieces

(Min. Order)


Shipping Cost:

Estimated freight per unit.

To be negotiated|

Freight Cost Calculator


After-sales Service: 1 Year
Warranty: 1 Year
Part: Clutch Bearing



Types of Ball Bearings

In their most basic form, Ball Bearings have one common feature – they are made of steel. The majority of these bearings are made of 52100 steel, which has one percent chromium and one percent carbon. The steel can be hardened by heat trea
tment. 440C stainless steel is used for rusting problems. A cage around the ball balls is traditionally made from thin steel. However, some bearings use molded plastic cages to save money and friction.

Single-row designs

Steel linear translation stages often use single-row designs for ball bearings. These types of bearings provide smooth linear travel and can withstand high loads. The material steel has a high modulus of elasticity and a high stiffness, as well as a lower thermal expansion than aluminum. For these reasons, steel is the material of choice for a ball bearing in a typical user environment. Single-row designs for ball bearings are also suitable for applications in humid or corrosive environments.
Single-row designs for ball bearings are available in a variety of sizes and are axially adjustable. They have a high radial capacity, but require relatively little space. Single-row deep groove ball bearings with snap rings are STN 02 4605 or R47, respectively. Bearings with snap rings are identified by a suffix such as NR. They may not have seals or shields installed.
These single-row angular contact ball bearings are capable of supporting axial and radial loads. In a two-raceway arrangement, the radial load on bearing A causes a radial load to act on bearing B. Both axial and radial forces are transmitted between single-row angular contact ball bearings, and the resulting internal force must be taken into account to calculate equivalent dynamic bearing loads P.
Single-row deep groove ball bearings are the most common type of ball bearings. These bearings are designed with only one row of rolling elements. The single-row design is simple and durable, which makes it ideal for high-speed applications. Single-row designs for ball bearings are also available in various bore sizes. They can also come in a variety of shapes and are non-separable. If you need a high-speed bearing, you may want to opt for a double-row design.
In addition to single-row designs for ball bearings, you can choose ceramic or steel ball bearings. Ceramic balls are considerably harder than steel balls, but they are not as hard as steel. Hence, ceramic bearings are stiffer than steel ball bearings, resulting in increased stress on the outer race groove and lower load capacity. This is a great benefit for those who need the bearings to be lightweight and strong.
The difference between single-row and double-row designs is in the way that the inner and outer ring are installed. A single-row design places the inner ring in an eccentric position relative to the outer ring. The two rings are in contact at one point, which causes a large gap in the bearing. The balls are then inserted through the gap. As a result, the balls are evenly distributed throughout the bearing, which forces the inner and outer rings to become concentric.
Deep-groove ball bearings are one of the most popular types of ball bearings. They are available in different designs, including snap-ring, seal and shield arrangements. The race diameter of a deep-groove ball bearing is close to the ball’s diameter. These types of bearings are suited for heavy loads, and their axial and radial support are excellent. Their main drawback is that the contact angle cannot be adjusted to accommodate a wide range of relative loads.

Ceramic hybrid ball bearings

Hybrid ball bearings with ceramic balls have numerous advantages. They feature improved kinematic behavior and require less lubrication. Consequently, they can reduce operating costs. Additionally, their low thermal expansion coefficient allows for smaller changes in contact angle and preload variations, and they can retain tolerances. Furthermore, ceramic hybrid ball bearings have significantly increased life spans compared to conventional steel-steel ball bearings, with up to 10 times the lifespan.
Although ceramic bearings can be used in automotive applications, many people believe that they’re a poor choice for bicycle hubs. They don’t reduce weight and only work well in high-rpm environments. As a result, many cyclists don’t even bother with ceramic-based bearings. However, both Paul Lew and Alan are of the opinion that ceramic bearings are best suited for industrial or medical equipment applications. Furthermore, Paul and Alan believe that they are ideal for high-altitude drone motors.
Another advantage of ceramic hybrid ball bearings is that they use less friction than conventional steel-based balls. They are also more durable, requiring less lubrication than steel-based bearings. Furthermore, the lower friction and rolling resistance associated with ceramic-based ball bearings means that they can last ten times longer than steel-based bearings. A ceramic-based hybrid ball bearing can be used for applications where speed and lubrication are critical.
Ceramic hybrid ball bearings feature both steel and silicon nitride balls. Silicon nitride balls have 50% more modulus of elasticity than steel balls and can improve accuracy and precision. Ceramic balls also have a smoother surface finish than steel balls, which reduces vibration and spindle deflection. These benefits result in increased speed and improved production quality. In addition to this, ceramic balls can also reduce the operating temperature, enhancing the work environment.
Hybrid bearings are a popular alternative to steel bearings. They have some benefits over traditional steel bearings, and are becoming a popular choice for engineered applications. Hybrid bearings are ideal for high speed machines. The material used to manufacture ceramic balls is a high-quality alloy, and is comparatively inexpensive. But you must understand that lubrication is still necessary for hybrid bearings. If you are not careful, you may end up wasting money.
These ball bearings can be used in many industries and applications, and they are widely compatible with most metals. The main advantage of hybrid ball bearings is that they are very durable. While steel balls tend to corrode and wear out, ceramic ball bearings can withstand these conditions while minimizing maintenance and replacement costs. The benefits of hybrid ball bearings are clear. So, consider switching to these newer types of ball bearings.

Self-aligning ball bearings

Self-aligning ball bearings are a good choice for many applications. They are a great alternative to traditional ball bearings, and they are ideal for rotating applications in which the shaft must move in several directions. They are also ideal for use in rotating parts where a tight tolerance is necessary. You can choose between two types: plain and flex shaft. Read on to find out which one will suit your needs.
Self-aligning ball bearings are designed with a higher axial load carrying capacity than single-row radial deep groove ball bearings. The amount of axial load carrying capacity is dependent upon the pressure angle. These bearings have a hollow raceway in the outer ring that allows the inner ring to pivot without friction. They are often used for high-speed applications. Because of their design, they are highly accurate.
Self-aligning ball bearings are radial bearings that feature two rows of balls in a spherical outer ring. They also feature two deep uninterrupted raceway grooves in the inner ring. Their unique features make them an excellent choice for applications where shaft deflection is a significant factor. Despite their small size, they have a high level of precision and can withstand heavy loads.
Self-aligning ball bearings can compensate for misalignment in shaft applications. The inner ring and ball assembly are positioned inside an outer ring containing a curved raceway. This spherical design allows the balls and cage to deflect and re-align around the bearing center. These bearings are also ideal for applications where shaft deflection is significant, such as in simple woodworking machinery.
Another type of self-aligning ball bearing uses a common concave outer race. Both balls and outer races automatically compensate for angular misalignment caused by machining, assembly, and deflections. Compared to spherical rollers, they have lower frictional losses than their spherical counterparts. Self-alignment ball bearings also have lower vibration levels compared to other types of bearings.
Self-aligning ball bearings operate in misaligned applications because their spherical outer raceway can accommodate misalignment. This design allows them to work in applications where shaft deflection or housing deformation is common. They are therefore more suitable for low to medium-sized loads. The only real drawback to self-aligning ball bearings is their price. If you need to purchase a self-aligning ball bearing for your next project, you can expect to pay around $1500.

China European Commercial Vehicles Truck Clutch Release Bearing 3100 026 432 for HOWO, Shacman, Dongfeng, Foton, FAW, Iveco, Scania, Renault, Volvo, Mercedes-Benz, Hi     supplierChina European Commercial Vehicles Truck Clutch Release Bearing 3100 026 432 for HOWO, Shacman, Dongfeng, Foton, FAW, Iveco, Scania, Renault, Volvo, Mercedes-Benz, Hi     supplier
editor by czh 2023-01-19