China factory Fast Delivery CZPT 1688 CZPT CZPT 51107 51108 51109 51110 Thrust Ball Bearing for Propeller Shafts Ships Bearing bearing distributors

Product Description

Product Description

Product Description

           Thrust bearings are divided into thrust ball bearings and thrust roller bearings.Thrust ball bearings are further divided into thrust ball bearings and thrust angular contact ball bearings.
           The raceway ring matched with the shaft is composed of a washer with a raceway, a ball and a cage assembly, and the raceway ring matched with the shaft is called a shaft washer, and the raceway ring matched with the housing is called a seat ring.
The rolling elements of thrust ball bearings are spherical, and the rings have corresponding R-shaped grooves. This bearing can withstand axial loads, but not radial loads. Because the rolling element is spherical, the friction force with the diameter of the raceway is small, so it can be adapted to the occasion of high working speed.
           The rolling elements of thrust roller bearings are cylindrical, conical or spherical roller types.
Mainly bear axial load, conical type and spherical roller type, can bear a certain axial load. Because of the large contact area between the rolling element and the raceway, the thrust roller bearing is correspondingly larger than the thrust ball bearing, and because the limit speed is lower than that of the thrust ball bearing, it is suitable for the occasions that bear heavier axial loads and lower speeds.
            Two-way bearings fit the middle ring to the shaft. One-way bearing can bear one-way axial load, and two-way bearing can bear two-way axial load. Bearings with a spherical mounting surface of the seat ring have self-aligning performance, which can reduce the influence of mounting errors. Such bearings are mainly used in automobile steering mechanisms and machine tool spindles.
            Thrust roller bearings are divided into thrust cylindrical roller bearings, thrust spherical roller bearings, thrust tapered roller bearings, thrust needle roller bearings. Thrust cylindrical roller bearings are mainly used in oil drilling rigs, iron and steel machinery. Thrust spherical roller bearings are mainly used in hydraulic generators, vertical motors, propeller shafts for ships, tower cranes, extruders, etc.

Product Parameters



Bearing No. Dimensions(mm) Weight Bearing No. Dimensions(mm) Weight
  d D B kg   d D B kg
51103 17 30 9 0.571 51203 17 35 12 0.053
51104 20 35 10 0.04 51204 20 40 14 0.082
51105 25 42 11 0.059 51205 25 47 15 0.12
51106 30 47 11 0.068 51206 30 52 16 0.15
51107 35 52 12 0.09 51207 35 62 18 0.22
51108 40 60 13 0.12 51208 40 68 19 0.27
51109 45 65 14 0.15 51209 45 73 20 0.32
51110 50 70 14 0.16 51210 50 78 22 0.39
51111 55 78 16 0.24 51211 55 90 25 0.61
51112 60 85 17 0.29 51212 60 95 26 0.69
51113 65 90 17 0.34 51213 65 100 27 0.77
51114 70 95 18 0.36 51214 70 105 27 0.81
51115 75 100 19 0.42 51215 75 110 27 0.86
51116 80 105 19 0.43 51216 80 115 28 0.95
51117 85 110 19 0.46 51217 85 125 31 1.29
51304 20 47 18 0.13 51405 25 60 24 0.34
51305 25 52 18 0.18 51406 30 70 28 0.53
51306 30 60 21 0.27 51407 35 80 32 0.79
51307 35 68 24 0.39 51408 40 90 36 1.14
51308 40 78 26 0.55 51409 45 100 39 1.47
51309 45 85 28 0.69 51410 50 110 43 1.99
51310 50 95 31 1 51411 55 120 48 2.64
51311 55 105 35 1.34 51412 60 130 51 3.51
51312 60 110 35 1.43 51413 65 140 56 4.47
51313 65 115 36 1.57 51414 70 150 60 5.48
51314 70 125 40 2.06 51415 75 160 65 6.75
51315 75 135 44 2.68 51416 80 170 68 7.97
51316 80 140 44 2.82 51417 85 180 72 9.29
51317 85 150 49 3.66 51418 90 190 77 11
51318 90 155 50 3.88 51420 100 210 85 14.6

Applications Fields

Thrust cylindrical roller bearings are mainly used in oil drilling rigs, iron and steel machinery. Thrust spherical roller bearings are mainly used in hydraulic generators, vertical motors, propeller shafts for ships, tower cranes, extruders, etc.




1.ISO Standard

2.Free Sample Available

3.Small Quantity Order is Available

4.Rich stock and Quick delivery

5.We have our own brand “HCSZ“,OEM service is welcomed

6.More than 10 years experience in bearing field 

7.High Quality with Competitive price

8.Prompt after service with our own technical teams


Related Products Series


Company Profile

ZheJiang Hangshuo Bearing Co., Ltd. is an enterprise integrating production and sales. The company is mainly engaged in the production and export of bearings and mechanical spare parts.

The company has professional high-tech talents, excellent sales team, professional service engineers, and wins the competition with “lowest cost, highest quality, most complete specifications, and largest scale”. Companies adhering to the “production specialization, product differentiation” business ideas, process design, product processing, internal and external packaging, finished product delivery and domestic and foreign transportation are strictly in accordance with the ISO9001 quality system standard standardized operation. The company has always adhered to the principle of “survive by quality, seek benefit by management, and seek development by service”, strictly control product quality, enrich product categories, and improve after-sales service, which has won high praise from domestic and foreign customers. The company strives to build brand products. At present, ZheJiang Hangshuo HCSZ is favored by most national distributors for its standardization, unification and specialization.


Shipping & Delivery





Q : Why choose us ?
 A: a.With background of more than 10 years.

b. Strict Inspection ,and the best quality price with reasonable price bearings provided .

c. OEM service provided.

d. Delivery products from our factory warehouse , delivery time is short .

e. After sale service at any time .


Q: What kind of bearing you produce ?
A:main products are deep groove ball bearing , spherical roller bearings , tapered roller bearing ,thrust ball bearing ,others could be special made for you .

Q:What brand you could provide ?
A: our brand is HCSZ, we also offer OEM service .

Q:Your product certifications ?
A: ISO 9001:2008 , ISO 9001:2000


Contact Angle: 45°
Aligning: Non-Aligning Bearing
Separated: Separated
Rows Number: Single
Load Direction: Thrust Bearing
Material: Stainless Steel
US$ 0.1/Piece
1 Piece(Min.Order)

Request Sample



Customized Request


What is a bushing?

What is a bushing? Basically, bushings are spherical or spherical bearings for machines with sliding or rotating shaft assemblies. Due to their excellent load-carrying capacity and anti-friction properties, these bushings are used in almost all industrial applications. This makes them useful in industries such as construction, mining, agriculture, transportation, hydropower, food processing and material handling.

Shell information

The demand for bushings is closely related to the global transformer market. Growing renewable energy sources and high replacement rates of aging grid infrastructure are driving the global demand for transformer bushings. Increased urbanization is another factor driving the demand for transformer bushings. Among global regions, Asia Pacific is the largest market for medium voltage transformer bushings. The following section provides a detailed analysis of the market.
Bulk-type bushings are used for lower voltage ratings and consist of a center conductor stud or tube and an insulator housing. They are available in dry or oil filled versions, and their oil content is shared with the transformer main tank. However, the trend is slowly turning towards RIP bushings. Regardless of how different types of bushings are used, it is important to understand the difference between them.
A recent CZPT survey indicated that bushings account for 17% of all transformer failures. Among them, 30% caused fire accidents and 10% caused explosions. This is not a small risk, especially for such important electrical components as transformers. Because casing is so important, utilities are increasingly looking to preventative maintenance. However, this requires continuous monitoring of the bushing and its insulation. There are many benefits to using online condition monitoring.
One of the main benefits of locating and replacing faulty bushings is improved operability and safety. If you notice that your car is unstable in the corners, your bushings are worn. Anti-roll bar bushings can also be a sign of bushing damage. Do not ignore these warning signs as they can have dangerous consequences. To avoid these potential problems, make sure to get your vehicle serviced as soon as you notice any of these symptoms.
Be sure to park your vehicle on a level surface before you start changing your car bushings. You may need to unlock the hood latch and apply the brakes before continuing. Then, open the valve cover. This will allow you to see the engine area and bushings. You should also check that the wheels are not moving and avoid placing sharp objects in the engine bay. If you have time, open the hood and if you can see the bushings, turn on the headlights.


There are various types of bushings, each serving a different purpose. Oil-filled types are the most common and are designed for vertical installations. On the other hand, the embedded ferrule can accommodate the connection to the wire leads in the lower end of the ferrule. This feature significantly reduces the length of the sump end of the casing, but also adds additional complexity and cost.
There are two basic types of bushings. The first is a solid pour and the second is a capacitive graded variety. Solid cast bushings are typically used for low voltage transformer windings, while gas insulated bushings are insulated with pressurized gas. Gas-insulated bushings are also used in SF6 circuit breakers. If you are in the market for a new bushing, be sure to consider its cantilever strength and design.
Electrical bushings are an important part of various electrical equipment. They help carry high-voltage current through the enclosure and act as an insulator between a live conductor and a metal body at ground potential. Bulk-type bushings consist of a central conductive rod (usually copper or aluminum) and an insulator (silicone rubber compound or composite resin) surrounding the rod.
Transformers require transformer bushings. The construction and materials used in the bushing play a key role in the durability and longevity of the transformer. Transformers with weak bushings can fail, causing extensive damage. Moisture or voids can cause insulation breakdown, resulting in extensive electrical damage. Appropriate materials and optimized construction can reduce electric field stress and extend the life of the bushing.
Capacitor grading bushings are more expensive and are used in almost all high voltage systems. They use a conductive layer within the insulating layer between the center conductor and the insulator. Different manufacturers use different materials to produce these bushings. Earlier, capacitor grading bushings were made of concentric ceramic cylinders with metallized surfaces. They are also made from laminated cardboard tubes with conductive layers.


A bushing is a support member that performs its function by acting as a washer and reducing noise and vibration. Bushings are used in valve covers and are made of corrosion-resistant materials to perform these functions. These products can be found in all types of machinery from cars to airplanes. Below are some common uses for bushings. Read on to discover more. Here are some of the most important features of the shell.
Electrical bushings transmit electricity. They can be used in circuit breakers, transformers, power capacitors and shunt reactors. The conductors of the bushing can be built directly into the bushing or through the bushing. Both current and voltage represent electricity. The bushing must have insulation capable of withstanding the voltage and its current-carrying conductors must be capable of carrying the rated current without overheating the adjacent insulation.
The bushing wraps around the stem, which is a relatively simple replacement part. It is a hardened part that prevents leaks and improves sealing. Plus, its low-cost replacement makes it a very easy-to-machine part. Bushings are also used in valves for guiding purposes. These two features make bushings an important part of many machines and applications. So, learn more about them.
Copper and brass are commonly used bushing materials. They have high compressive strength and high surface pressure. This material is suitable for bearings in low speed situations and heavy duty applications. Copper and brass are the most common types of casings, and they are both made in China. They are all relatively inexpensive and are available in a variety of materials and sizes. If you are considering purchasing a casing, keep in mind that it must meet national standards.


Whether you’re looking for a replacement bushing for your rear suspension or just need to replace the fork, you have a few different options. The two main types of bushings are coated and uncoated. If you want to save money on bushing replacements, you should consider getting a cheaper lower fork. Whether you’re replacing bushings to improve ride quality or prevent damage to your wheel loader, you’ll find a bushing replacement option that fits your budget.
While most cars are compatible with bushings, some iconic parts from premium brands like BMW and Mercedes require special tools to replace. If you are not confident in your mechanical abilities, consider hiring a mechanic to do it. Mechanical replacement bushings typically range from $200 to $500. If you’re comfortable with mechanics and have some mechanical knowledge, you can save money by trying the job yourself. For example, control arm bushings range in price from $20 to $80. It is important to check the alignment after replacing the bushing to avoid further damage.
Control arm bushing replacements are usually relatively inexpensive, but you may need to replace several at the same time. You should check the prices of several mechanics before making a decision. You can easily save between $50 and $100 by comparing quotes. Plus, you’ll save a lot of money by finding the right mechanic for the job. You can also use an online comparison tool to compare prices. You can find a mechanic that suits your needs at an affordable price.
Control arm bushings are also an inexpensive way to replace parts of a car’s front or rear suspension. Typically, control arm bushings are made of two metal cylinders covered with a thick layer of rubber. They wear out due to accidents, potholes and off-roading. They are mounted with a bolt that goes through the inner barrel. It is important to replace these bushings as often as needed to improve operation.

China factory Fast Delivery CZPT 1688 CZPT CZPT 51107 51108 51109 51110 Thrust Ball Bearing for Propeller Shafts Ships Bearing   bearing distributorsChina factory Fast Delivery CZPT 1688 CZPT CZPT 51107 51108 51109 51110 Thrust Ball Bearing for Propeller Shafts Ships Bearing   bearing distributors
editor by CX 2023-05-12

Recent Posts